Stainless Steel Billets 

Our modern steel melting Shop consists of an induction furnace, LRF and a continuous casting machine. The quality is controlled by highly trained personnel by means of continuous testing and process control. This shop produces billets / blooms / RCS  in various special steel grades as per IS, BIS, DIN, SAE Standards.

SIZE RANGE BILLET / BLOOM 90mm x 90mm , 100 x 100 mm, 125 x 125 mm, 160 x 160 mm, 200 x 200 mm, 160 x 250 sq.mm

ROLLED SHAPES: Stainless Steel, Carbon Steel , Alloy Steel,  Low Alloy & Spring Steel - Round: 20 mm to 250 mm, RCS & Flats

MAJOR STEEL GRADES:
Duplex Steel (2507, 2205, 329L), Stainless Steel 17-4 PH (630 Gr.) 15.5 PH, 17.7 PH, 4122, Duplex Steel, Nickel, Inconel, Monel, Hastalloy, Titanium, Copper, Brass, Aluminium etc.

Prayas metal offers its Continuous Castings / Billets for various applications like

1. Forging Industries – for forging, upsetting, and ring-rolling applications. A very important field of application for Ambica’s semis is the production of flanges.

2. Re-rolling Industries – for re-rolling into various Sections & Profiles

3. Processing Industries – for peeling or turning the Hot Rolled Bars into the Cold Finished Bars & Precision Shafts.

At MSM, we take all the necessary precautions to avoid the ingress of gases from the atmosphere during its Billet casting process. This is done by ensuring completely closed casting through Argon Shroud during Continuous Casting. In case of Ingot Casting, it is ensured by providing an Inert Gas Shroud to the metal stream between trumped & the ladle. The material also conforms to the Siemens & Bosch specifications.

Size Range
90 x 90 mm
120 x 120 mm
140 x 140 mm
160 x 160 mm
200 x 200 mm
220 x 250 mm


Conditions of Supply

• Suitable for Ring Rolling, Forging, Re-rolling & Up-setting.

• Maximum length up to 8 meters

• Cold Sawable

• Hard Stamped with Heat Number, Grade & Size & Weight of the Billet

• Spot Ground or Fully Ground Surface - as per the requirement

• Free of surface defects & Cracks

• Smooth ends (without burrs) / No sharp edges

• 100% material identity tested thru Niton handheld spectrometer

Casting Grade billets can be supplied as per chemistry, and length required by buyer is used instead of scrap for Melting in Foundries for better outcome in terms of quality, uniformity, recovery, low labour and power cost, with abnormal low Carbon, Sulphur, Phos, etc.

With following benefits to chose Casting Grade Melting Billets over Melting Scrap.

	SS Melting Scrap	Casting Grade Billets
Yield	94% - 95%	98% - 98.5%
Power	2 - 3 Hrs per Heat	1.5 Hrs Per Heat
Uniform	No	Yes
Spectro & Sampling	Required before and after melting at various stage	Required only once that also 1 Piece as it is 1 heat material
Chemistry	No. of samples Different sample to sample	Uniform whole lot
Time While Unloading	Required number of labour to unload and takes time + charges	if Crane available can be done easily within 1/2 Hr by one Man
Carbon Sulphur Phosphorus Ni., Mo.,Cr. - Etc	Different sample to sample	Uniform and as per customers requirement S. , Ph. , C. can be maintained low gives good quality